How to Make an Easter Pancake Wreath
I don’t what’s better than an adorable Easter wreath – except maybe Two… or even THREE adorable Easter wreaths. In this tutorial, I’m going to show you how to stretch your supplies with the popular – and Sincerely Creative Mom created – pancake wreath!
Making your Easter pancake wreath a little later? Pin this how-to for when you’re ready.
*This post contains affiliate links for companies we love. If you make a purchase through these links, we may make a small commission.
What is a Pancake Wreath?
A pancake wreath is a thinner wreath that can fit between two doors. Its name comes from being “round and flat as a pancake” – especially compared to those thicker, deco mesh wreaths.

When I created this new wreath design, it was for a wreath class I was hosting. I did it to make an affordable option for class participants that would also cost me less in supplies. Plus, I wanted the Michiganders in my class to get the most bang for their buck and be able to display their wreath between their two doors. Thus, the pancake style wreath was born! (And it’s been one of my top sellers at the local boutique!)
It might sound weird to read “between two doors,” if you’re from a place that only requires one front door. But, I’m from Michigan, ya’ll, where the winters are no joke! Our unpredictable Michigan weather and harsh, wintry seasons typically require Michiganders have a front door and storm door. The great thing about hanging these wreaths between the two doors is that they get extra protection from the elements – even when your wreath Is made sturdy and of great quality materials.
Easter Pancake Wreath Supplies
While this tutorial shows you how to make a pancake wreath for Easter, the video included in this post will show you how to make THREE pancake wreaths out of just TWO rolls of mesh! By stretching your supplies like this, you can save money and reduce waste!
Here are the supplies needed for one wreath. To get a full list of the exact supplies used in this wreath and their prices, visit Mel’s Pricing Method (more on that later)!
14-inch wreath frame from the Dollar Tree
Metal bunny sign
1 roll of brown mesh
2 rolls of 2.5-inch Easter ribbon for
1 roll of 2.5-inch Easter ribbon for the bow
2 rolls of 1.5-inch Easter ribbon
15 pipe cleaners
Scissors (to cut ribbon)
Rotary cutter (to cut mesh)
Zip-tie mount (optional)
DAP Rapid or E6000 craft glue (optional)
Each roll of ribbon should have a different design.
While you can use such Easter ribbon and ones with egg or bunny designs, you could also use plaid or polka dot designs, floral patterns and spring colors, like pinks, purples, greens and other pastels, if you want to extend your wreath’s use after the holiday or sell it as a spring wreath, too! Another bonus? Etsy LOVES when you have more than one of the same product.

How to Make a Pancake Wreath for Easter
Remember, the video tutorial in this article (also found on the Sincerely Creative Mom YouTube channel) will show you how to make THREE wreaths!
The first few steps help show you how to prep, especially if you’re making more than one wreath.
Step 1: Attach zip-tie mounts or put a hole through your sign
Depending on the type of sign you’re using, you’ll want to attach two zip-tie mounts or put two holes in the top and bottom of your sign, so you can attach it to your wreath. Holes are the best option, but some signs may be too thick for that.
If you use zip-tie mounts, use a little extra DAP Rapid or E6000 craft glue to give the mount a little extra security – especially in hot weather. Use a clamp to help it adhere as it dries.
Step 2: Cut your ribbon for the tails
Measure your 2.5-inch ribbon 14-inches long. You want to cut 12, 14-inch pieces. Do this with 2 of your 2.5-inch rolls of ribbon (two different designs), making 24 tails in all. Once the pieces are cut, dovetail the ends by folding the ribbon in half and cutting at an angle.
Step 3: Make your tails
Take one of each ribbon piece and layer them, with your favorite design on top. Fold it to find the center.
Step 4: Prep your mesh
Measure your mesh pieces 20-inches long. You want 12 pieces altogether.
In the video, I cut the pieces to 19.5 inches. I usually do 20-inch cuts for my pancake wreaths, but since I made 3 wreaths with 2 rolls, I did 19.5 to be sure I had enough – just in case the roll was short.
Step 5: Attach pipe cleaners to the wreath frame
Twist a pipe cleaner around the frame’s inner two rings at each the six brackets – using six pipe cleaners total. Then, twist a pipe cleaner around the frame’s outer two rings between the six brackets – using six more pipe cleaners.
Twist the pipe cleaners tight, making them low to the frame. You shouldn’t be able to fit a finger between the pipe cleaner and metal.
Step 6: Make your deco mesh ruffle
Lay your mesh in front of you and scrunch as you gather it towards you. Pinch the center – the ruffle will look like a butterfly.
Step 7: Attach your deco mesh ruffle to the frame
Lay the center of the ruffle in between one of the outer ring pipe cleaners and twist the pipe cleaner over it to secure the ruffle to the frame. Overlap the ends of the mesh. The ruffle will look like a circle.
Repeat steps 6 and 7 until all six outer pipe cleaners are holding a ruffle.
Step 8: Add ribbon to the outer ring
Lay your ribbon tails in the pipe cleaner, on top of the mesh circle, and twist the pipe cleaner over the ribbon. The ribbon will be in a wide “v” shape, with the dovetails facing out.
Cut the excess pipe cleaner arms that are holding the mesh and ribbon. The pull your ribbons apart, then to the sides so you can see both of the ribbon designs.

Step 9: Repeat steps 6-8 on the inner ring
Ruffle and attach each remaining mesh piece to the inner pipe cleaners, then attach and spread your ribbon in the same way.
Step 10: Attach your sign
Attach your sign to the right of the center of the wreath, so you have space for two bows. To attach the sign, put a pipe cleaner through each zip-tie mount or hole and twist the end tight. Push the pipe cleaner right through the mesh and into the frame. Twist the pipe cleaners around the wire frame.

Step 11: Make two smaller bows
Using your third 2.5-inch ribbon design, make the first parts of your bows. Each bow will be about a yard and a half a piece with a 6-inch tail and 5-inch loop. Pinch, twist and loop to make three loops. Then take one of your 1.5-inch ribbons and make the second part of your bows. They will have the same measurements and number of loops.
With your other 1.5-inch ribbon design, you’ll make the third layer for the bow. Make a 1-inch center loop with this ribbon, then pinch twist and loop, making three additional loops.
Stack one of your 2.5-inch ribbon layers with one of each of your 1.5-inch ribbon layers to make each bow.
Once stacked, tie a pipe cleaner around the middle of each bow and dovetail the ends.

Step 12: Attach your bows
Stick the pipe cleaners through the mesh and twist them around the wire frame. Then fluff your bow by pulling on the loops and spreading them to the sides.
Pricing Your Pancake Wreath
One of the most common questions I get is “How much would you sell that for?” If you followed this tutorial, finished your pancake wreath and are asking that question, I have the perfect answer for you! My class, Mel’s Pricing Method, helps answers that question by providing an equation along with the why behind that equation. Even better? We go over this exact wreath in the class! You’ll get a list of all of the materials used to make this wreath AND their prices. You’ll also get other real-life examples and learn about pricing other products and services. If you’re ready to take your business to the next level, I highly recommend taking this class.
Easter Pancake Wreath Instructions
Use these instructions and supply list to take with you when you shop for your Easter wreath.
How to Make Your Wreath
Equipment
- Pair of scissors
- Rotary cutter
- 2 Zip-tie mounts (optional)
- DAP Rapid or E6000 craft glue (optional)
Materials
- 14-inch wreath frame
- 1 metal bunny sign
- 1 roll brown mesh
- 3 2.5-inch Easter ribbon rolls
- 2 1.5-inch Easter ribbon rolls
- 15 pipe cleaners
Instructions
- Attach two zip-tie mounts or put a hole through your sign, so you can attach it to your wreath. If you use zip-tie mounts, use a little extra DAP Rapid or E6000 craft glue to give the mount a little extra security. Use a clamp to help it adhere as it dries.
- Cut 12, 14-inch tails with two of your 2.5-inch ribbon rolls, making 24 tails in all. Once the pieces are cut, dovetail the ends by folding the ribbon in half and cutting at an angle.
- Take one of each ribbon piece and layer them, with your favorite design on top. Fold it to find the center.
- Cut 12 pieces of mesh 20-inches long.
- Twist a pipe cleaner to the wreath frame around the inner two rings at each the six brackets. Then, twist a pipe cleaner around the frame’s outer two rings between the six brackets. You’ll use 12 pipe cleaners total.
- Lay your mesh in front of you and scrunch as you gather it towards you to make a ruffle. Pinch the center – the ruffle will look like a butterfly.
- Attach your deco mesh ruffle to the frame by laying the center of the ruffle in between one of the outer ring pipe cleaners and twist the pipe cleaner over it to secure the ruffle to the frame. Overlap the ends of the mesh. The ruffle will look like a circle.
- Repeat steps 6 and 7 until all six outer pipe cleaners are holding a ruffle.
- Lay your ribbon tails in the pipe cleaner, on top of the mesh circle, and twist the pipe cleaner over the ribbon. The ribbon will be in a wide “v” shape, with the dovetails facing out.Cut the excess pipe cleaner arms that are holding the mesh and ribbon. The pull your ribbons apart, then to the sides so you can see both of the ribbon designs.
- Repeat step 9 on the inner rings.
- Place your sign to the right of the center of the wreath, so you have space for two bows. Put a pipe cleaner through each zip-tie mount or hole. Push the pipe cleaner right through the mesh and into the frame. Twist the pipe cleaners around the wire frame.
- Using your third 2.5-inch ribbon design, make the first parts of your bows. Each bow will be about a yard and a half a piece with a 6-inch tail and 5-inch loop. Pinch, twist and loop to make three loops. Then take one of your 1.5-inch ribbons and make the second part of your bows. They will have the same measurements and number of loops.
- With your other 1.5-inch ribbon design, you’ll make the third layer for the bow. Make a 1-inch center loop with this ribbon, then pinch twist and loop, making three additional loops.
- Stack one of your 2.5-inch ribbon layers with one of each of your 1.5-inch ribbon layers to make each bow. Once stacked, tie a pipe cleaner around the middle of each bow and dovetail the ends.
- Attach your bows by pushing the pipe cleaners through the mesh and twisting them around the wire frame. Pull and spread the loops to fluff your bow.
Video
Other DIY Easter Wreath Ideas
If you’ve been around here long enough, you probably know that I love, love, LOVE bright colors and beautiful florals. So it might not come as a big surprise when I say that I just LOVE this time of year for wreaths. So many perfect flowers, sprays and ribbons in the best colors and patterns. If you’re trying to find inspiration for your own Easter décor, here are a few ideas!
Grapevine with Easter Florals
Make a DIY Easter wreath that can double as spring décor once the holiday is over by using materials that celebrate both. Those may include eggs, butterflies and bright colored ribbons. And of course, the best way to celebrate both the holiday and the season is with spring florals and a grapevine base.

Grapevine with Easter Sign
Another great way to decorate a grapevine wreath for Easter is with an adorable sign – and, gosh, are there some stinkin’ cute signs for Easter! I love the one in the picture below – which helps ensure the bunny makes a stop at the Morrow house!

Moss with Easter Decor
This unique moss base Easter wreath uses a beautiful moss base that emphasizes the fresh, new green that comes with spring. Since the base does some of the work in bringing a natural vibe and almost stealing the show on its own, the rest of the design doesn’t need to be too complicated. In the wreath pictured below, I joined two bundles made with whimsical, Easter-themed sprays and added a bow and voila! This wreath too less than half an hour to make.

DIY Wreath Resources
For allllll things wreaths – including inspiration, tutorials, videos, wreath kits, classes and more – check out Melslinks.com. It’s your one stop shop for links to everything! Need wreath supplies and tools? Melslinks.com. Want to sign up for our newsletter or visit my social sites? Melslinks.com. Want to check out my other home décor products, eBooks, wreath kits and wreaths for sale? You know what to do!
If you have questions or want text alerts about new lives, you can also join my txt group by texting 810-498-2310.